Selkirk features a complete line of Chimney, Venting & Fireplace products to serve the Hearth Wholesale and Retail markets.

Stainless Steel Rigid Liner

Stainless Steel Rigid Chimney Liner, listed to ULC S-635 & S-640 for relining or new masonry chimneys. Oil and Wood applications. 5", 6", 7" & 8" inner diameters.

Saf-T Vent AL29-4C® alloy vent systems are UL, ULC and cUL listed for venting Category II, III and IV gas burning appliances through a side wall and as a Type BH Gas Vent System.

EZ Seal
Single Wall Gasketed Gas Vent system (6”-16” diameter)
- meets all code requirements for condensing and positive pressure special gas vent systems.

Model SC (Sealed Combustion)
Zero Clearance Concentric Gas Vent system (3/5”, 4/7” diameters)
- Double Wall system designed for sealed combustion/direct vent applications

Model CI
Double Wall Gas Vent system (3”-16” diameter)
- Meets requirements of all certified gas-fired heating systems

Model GC
Single Wall Gas Vent system (18" to 32" diameter)
- Single-wall large diameter vent

All Saf-T Vent products carry a 15 year manufacturers warranty.

DSP - DOUBLE WALL STOVE PIPE
Black Stove Pipe connects a Wood Stove to Insulated Chimneys. Double Wall system features a Black Aluminized Steel outer casing and Stainless Steel inner liner. 6" clearance to combustible materials. 6", 7" & 8" inner diameters.

Pellet Pipe

Usage: For venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570 F (298.80 C).

Sizes: 3" & 4" Diameter

Materials:
Case - GalvalumeT AZ 150
Liner - Type 304 - Stainless Steel
Collar - Aluminized

Listing: Listed to ULC S609, ULC/ORD C441 and UL 641

Features and Benefits:
- Sturdy collars for snug fit.
- Approved with 45 elbow termination and collar with screen.
- 45 Degree, or 90 Degree elbows are crimped for improved air tightness.
- Higher grade Stainless liner for improved resistance to corrosion.
- Collars and joints sealed internally with high temperature sealer.
- Ceramic fibre gasket seal at each joint.

Direct-Temp Kits for Pellet Stoves
Direct-Temp®’s co-axial pipe design integrates both a fresh air intake and a flue gas exhaust.  The outer vent, supplying fresh outside air, is preheated for high efficient combustion. Outside air is pre-heated before entering the firebox, creating improved air flow and more efficient combustion.  The inner pipe, made of 304 stainless steel allows the exhaust gases to vent and provides exceptional corrosion resistance for burning wood pellets and corn. The 304 stainless steel material of the inner pipe permits precision manufacturing tolerances, which ensures tight seals and added structural integrity of the system.  Our liner has a continuous lazer welded seam which is superior to lock seam designs that may leak.